Solis Ventus
Software
SV Studio v1.1.0
Post date :
December 17th, 2024
IMPORTANT!
If your pedal is currently running on firmware version v1.2.0 or lower you will need to the update the firmware to version v1.3.0 or higher before you can use the pedal with the SV Studio. Please refer to the updating guide below.
Note (for Windows)
In some cases, installing the software may require Administrator privileges. If you encounter any issues during installation, try right-clicking the installer and selecting "Run as Administrator".
Firmware
Post date :
December 19th, 2024
Solis Ventus Firmware v1.3.1
Update History (pdf file)
* You will need the SV Studio editor software to perform the firmware update.
Update procedure :
1. Begin with the pedal powered down, and the SV Studio software on your computer closed.
2. Power up the the pedal - while the green light is still flashing hold down footswitch A/Y and
footswitch C/TAP together. Release when the display reads "FIRMWARE UPDATE".
3. Connect the pedal to your computer via USB and start the SV Studio software.
4. Proceed by selecting one of the two options:
If you select "I do not have the files" SV Studio will automatically download the latest firmware file to be used in the update process.
5. Start the update.
DONE